Introduction
Kingkus, as one of the leading Chinese acoustic panel manufacturers, we create kingkus Sound-absorbing board based our advanced material supply chain, including Polyester Fiber Acoustic Wall Panel, Wooden Acoustic Panel, Fabric Wrapped Panel, Wood Wool Panel, Wooden Diffusers and Other Acoustic Furnitures. These products are for interior and exterior environments that features classic and elegant concepts.
Technical Information
| Model |
Perforated wooden panel |
| Specification |
Hole 3/6/9 mm, Center to Center 16mm |
| Thickness |
12mm/15mm/18mm |
| Surface |
Melamine / Wooden Veneer with Varnish/ Painting/HPL |
| Co Material |
E0 MDF/B1 MDF/Magnesium composited /NF Golden |
| Back |
Soundtex acoustic felt |
| Installation |
Aluminum keel and clips, wood frame, gun nail |
| Test |
Eco protction, sound absorption, flame retardant |
Our Kingkus Perforated Wooden Panels
Perforated Wooden Panels Projects
Dimensions
There are different sort of large dimension panels to be used on walls and not practicable continuous roofs, and standarized roof plates in versions of visible profiling, semi-hidden, hidden and practicable hidden.
Wall lining
Panel plates are often used on mesures 2440*133mm,2440*197mm(2400x1200, 2400x600mm for Perforated wooden panel). with 15mm,16mm,18mm of thickness.
Ceilings
it is more usual to use 15mm thick plates on standardized measures 1200*133mm,1200*197mm(1200x600 and 600x600 for Perforated wooden panel), though other combinations are also possible.
The different plates are available with different perimetral , depending on the type of desired assembly.
Materials and finishes
The support material is always MDF E0 and fiberboard wood panels in standard or fireproof versions. Surface finishes can be raw, melamine,Veneer, varnished or lacquered. Other options on request.
The plates may incorporate to the back and as an option, an acoustic veil to improve the sound absorbing qualities of the panel.
Cleaning and Maintenance
After installation, the panels should be treated as any fine piece of furniture would be treated. A final cleaning with a soft cloth and any good furniture polish will enhance and preserve the luster of the finish. Panels may be vacuumed with a non-marring, natural bristle head. Avoid using a short or hard bristle cleaning head as damage may occur. After removing the dust, you should restore the woods beauty by wiping the panels with a quality furniture polish such as lemon oil.
Do not spray the polish directly on the panel. Instead, apply the polish to a soft dust-free cloth and wipe the panels lightly. At all costs, avoid using water or a damp cloth as this may affect the stability of the veneer surface. The intervals of cleaning will depend on the conditions of your building. Cleaning is recommended at least once a year but may be dependent upon your building conditions. Periodic maintenance will preserve the look and performance of Kingkus wooden acoustic panel for many years to come.
| Model |
Specification |
NRC |
Open Area |
| P316 |
P/M/V-P-3/8-16-16 |
0.85 |
3% |
| PL316 |
P/M/V-PL-3/8-16-16 |
0.85 |
3% |
| P616 |
P/M/V-P-6/6-16-16 |
0.87 |
11% |
| PL616 |
P/M/V-PL-6/6-16-16 |
0.87 |
11% |
| P916 |
P/M/V-P-9/9-16-16 |
0.92 |
25% |
| PL916 |
P/M/V-PL-9/9-16-16 |
0.92 |
25% |
Audited Supplier 
){kind=link}
){kind=link}