| Kingkus is an ideal base to print on utilizing the latest in inkjet technology and specialized graphics programs. Ideal for signage and full color images, Kingkus can be used both as individually printed panels and for multi-panel displays. Specific repeat sizes are not required and anything can be printed from logos, photographic imagery and graphics. If it can be scanned and digitized, it can be printed onto Kingkus polyester fiber panel. As it is an inkjet printing process your color choice and number is unlimited. 1200*600mm custom print samples are available at cost. Images should be a minimum of 600 wide at 300DPI. Images smaller than this may print with pixelization or appear blurry.
We are happy to take your images and make them print-ready.
| Acoustic Panel Type |
Painted Polyester fiber Acoustic Panels |
| General use |
Used as a decorative sound reducing panel. |
| NRC |
0.4~0.95,SGS Test for polyester fiber acoustic panel |
| Environmental |
SGS E0,Does not contain any Red List chemicals * |
| Color |
35 colors polyester fiber |
| Material |
100% recyled polyester fiber |
| Size |
1200*600mm or 600mm*600mm |
| Thickness |
9mm, 12mm |
| Flame Retardant |
SGS B1 fire rated for polyester acoustic panel |
| Weight Range |
1650gsm and 2000gsm in stock |
| Product Keywords |
decorative office polyester pet fibre acoustic board,decorative office acoustic panel embossed |
Kingkus screen printed panels will have an unprinted border approximately 1cm wide to ensure this border and create a clean edge to join panels. Patterns do not exactly edge match, but repeats can be found to create seamless patterns. Check the Kingkus panel prints spec sheet for information on repeats for each pattern. |
Environmental
Kingkus is committed to best practice through our ISO 9001 and ISO 14001 accredited Quality and Environmental Management Systems.
Kingkus products contains a minimum of 75% previously recycled polyester fiber (from PET bottleflake)
ensuring comparatively low embodied energy.
Off-cuts and manufacturing waste is re-used or
recycled wherever possible.
Uncontaminated kingkus polyester fiber panel can be recycled.
Kingkus polyester fiber acoustic panel is manufactured from 100% polyester fibers and does not contain chemical binders including
formaldehyde. Kingkus polyester fibers support safer
indoor air quality and will not become a potential
airborne pollutant.
Suitable applications
Tackboard, hook-and-loop receptive surface, acoustic wallcovering. Accepts tacks and staples
Toxicity
Polyester is classed as no more toxic than wood under the state of New York Article 15 part 1120. Polyester is pH7.8 (where pH7.0 is neutral),resistant to biological, bacterial or vermin attack.
Impact Resistance
Not adversely affected at impact velocities over 52.5ft/s
Finish
Polyester fiber Non-woven. No pattern repeat but Panel has a directional grain. Product may vary from samples and batch to batch due to fiber blending and lay-up which is an inherent feature of this product.
Physical description / properties
Boiling Point: N/A
Melting Point: 428ºF
Vapour Pressure: N/A
Specific Gravity: Polyester 1.38
Flash point: N/A
Explosive limits: N/A
Solubility in water: Not soluble
Alkalinity: pH 7.8
Relative Vapour Density: N/A
Cleaning And Care:
Remove dust and dirt by dusting, vacuuming, or with a soft cloth or sponge and a solution of carpet
or upholstery shampoo. Always use a soft, damp cloth and blot dry. Spot cleaner
Commercial Instant Spot Remover has been used with success for light soil. No guarantee is given for cleaning results with this product.
Service
For further information about our panel or any other
Kingkus product, please contact your installation
professional
Case
Audited Supplier 
){kind=link}
){kind=link}