Recording Room/Studio 1mm Micro Hole Perforated Wood Timber Acoustic Panel

• Customization: Available
• Application: Meeting Hall, Theater, Music Hall, Gym, Manufactur
• Color: White
• Model NO.: 1.0mm Veneer Micro wooden acoustic panel
• Density: 750kg/M3
• Surface: Painted, Melamine.Veneer.HPL
• Base Material: MDF, HDF
• Installation: U Card
• Alkalinity: pH 7
• Impact Resistance: Not Adversely Affected at Impact Velocities Over 5
• Solubility in Water: Not Soluble
• Back: Felt
• Thickess: 15mm/18mm
• Type: Acoustic Panels
• Acoustic Panel Type: Wooden Acoustic Panels
• Wool Acoustic Panel Type: Perforated Wooden Acoustic Panels
• Eco-Friendly: E0
• Fireproof Grade: B1
• Surface Finishing: Veneer
• Edge: Square
• Certification: ASTM, BS
• Transport Package: Pallet, Carton and Plastic Film
• Specification: 1220*197*15mm/18mm
• Trademark: Kingkus
• Origin: China
• HS Code: 4410190000
• Production Capacity: 500, 000 Sqm/Year

Product Description

Introduction
Kingkus, as one of the leading Chinese acoustic panel manufacturers, we create kingkus Sound-absorbing board based our advanced material supply chain, including Polyester Fiber Acoustic Wall Panel, Wooden Acoustic Panel, Fabric Wrapped Panel, Wood Wool Panel, Wooden Diffusers and Other Acoustic Furnitures. These products are for interior and exterior environments that features classic and elegant concepts. 

Technical Information

Model	1.0mm Venner Micro wooden acoustic panel
Specification	Hole 1.0mm, Center to 2mm or 4mm
Thickness	15mm/18mm
Surface	Wooden Veneer with Varnish/ HPL
Co Material	E0 MDF/B1 MDF/Magnesium composited /NF Golden
Back	Soundtex acoustic felt
Installation	Aluminum keel and clips, wood frame, gun nail
Test	Eco protction, sound absorption, flame retardant

Wooden Panels Projects

 

Materials

Kingkus Micro perforated Wooden panels are manufactured on fibreboard panels (MDF) with micro perforations on the visible side and big holes in the back side to improve absorption coefficient of the panels.

Wide range of finishes

Finishes available are varnished wood  lacquered veneer, melamine and HPL. Also through colored fibreboard panels are available.  

Installation options

Our Kingkus micro perforated acoustic panels can be manufactured in several  versions, to be installed on walls or ceilings. In both cases you should leave behind a space or filled with a low density mineral fibre to help improve the optimal absorption coefficient.

Panel sizes

Standardized sizes are 2400x600, 1200x600 and 600x600 mm. with a thickness of 16mm. Other sizes available.

Decorative and acoustic properties

The surface of these panels is covered with tiny micro perforations that trap the noise and reduce sound reverberation in the room.

Cleaning and Maintenance

After installation, the panels should be treated as any fine piece of furniture would be treated. A final cleaning with a soft cloth and any good furniture polish will enhance and preserve the luster of the finish. Panels may be vacuumed with a non-marring, natural bristle head. Avoid using a short or hard bristle cleaning head as damage may occur. After removing the dust, you should restore the woods beauty by wiping the panels with a quality furniture polish such as lemon oil.

 

Do not spray the polish directly on the panel. Instead, apply the polish to a soft dust-free cloth and wipe the panels lightly. At all costs, avoid using water or a damp cloth as this may affect the stability of the veneer surface. The intervals of cleaning will depend on the conditions of your building. Cleaning is recommended at least once a year but may be dependent upon your building conditions. Periodic maintenance will preserve the look and performance of Kingkus wooden acoustic panel for many years to come.

Model	Specification	NRC	Color
MricoP 0.5mmVenner	V-MP0.5-4-4-16(2-2-16)	0.86	Veneer
MricoP 0.5mmHPL	H-MP0.5-4-4-16(2-2-16)	0.86	HPL
MricoP 1.2mmMelamine	M-MP1.2-8-8-16	0.88	Melamine
MricoP 1.2mmVeneer	V-MP1.2-8-8-16	0.88	Veneer
MricoP 1.2mmHPL	H-MP1.2-8-8-16	0.88	HPL